Skip To The Main Content

Shaping and sintering

Ceramic Forming High Precision


Various shaping techniques

For the shaping of ceramic powders, Ceramaret uses fully automated single and double action mechanical presses, as well as cold and hot isostatic presses (CIP and HIP).
Tungsten carbide is generally used in the manufacture of shaping equipment, thus guaranteeing maximum precision and durability.
For ceramic components of complex shape with high volume requirements, the molding of green parts by injection  (Ceramic Injection Molding or CIM) is more appropriate .
Near net shape products by means of various pressing techniques 

Various pressing techniques can achieve the desired shape of a ceramic part that meet your product specifications. Our mastery of tool design and the manufacturing process enable us to achieve unmatched dimensional and geometric precision.
Cermaic firing at 1600 degrees celsius

Debinding and sintering of ceramics 

Ceramic powders contain binding agents (polymers for example) that facilitate the compacting and shaping of the parts.These binding agents are removed from the part during the debinding process consisting in heating the shaped parts at high temperatures.

Sintering, the process for the compacting of ceramic particles, uses high temperatures (up to 1600 -1800°) to heat the shaped and debinded parts over a long period of time.

Specifically designed furnaces are required to carry out these two processes.